Schneider Electric BMH1002T16F2A Servo motor BMH -IEC 100 mm -6 Nm -6000 rpm -eje c chaveta -con freno -doble conector acodado orientable - encoder abs ST 16b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors feature medium rotor inertia and are perfectly adapted for applications with high loads. Due to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous standstill torque of 6.1 Nm and reaches a peak torque of 18.3 Nm. Its rated speed is up to 3500 revolutions per minute, depending on the supply voltage. This results in a voltage-dependent nominal power of up to 1760 W. The built-in encoder is designed as a single-turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange measures 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforming to the protection class IP54. The motor housing meets the IP65 protection class. An integrated holding brake is provided. For the operation of the synchronous motor, the Lexium range LXM32 servo amplifiers are recommended. With the Green Premium environmental label, you can get detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.