Schneider Electric BMH1002T11A1A Servo motor BMH -IEC 100 mm -6 Nm -6000 rpm -eje c chaveta -sin freno -doble conector recto - encoder abs ST 128b SinCos -IP65/IP65

Servomotor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servomotors has a medium rotor inertia moment and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 6.1 Nm and reaches a peak torque of 18.3 Nm. Its rated speed is up to 3500 rpm depending on the supply voltage. There is a voltage-dependent nominal power up to 1760 W. The built-in encoder is designed as a singleturn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23 in straight design. For mounting, the motor flange measures 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforms to the IP54 protection class. The motor housing meets the protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can get detailed information about material contents, environmental impacts, and the circular economy to support your sustainability goals.