Schneider Electric BMH1002P22A2A Servo motor BMH - IEC 100 mm - 6,2 Nm - 6000 rpm -eje liso -sin freno -doble conector acodado orientable -encoder abs MT 128b SinCos -IP65/IP67

Servo motor BMH from the Lexium 32 series of servo drives. The BMH series of three-phase AC servo motors feature an average rotor moment of inertia and are perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 6.0 Nm and achieves a peak torque of 18.0 Nm. Its rated speed depends on the supply voltage and can reach up to 5000 rpm. There is a voltage-dependent nominal output of up to 2270 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and conforms to IP65 protection. The motor housing is also IP65 rated. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.