Schneider Electric BMH1002P07A1A Servo motor BMH - IEC 100 mm - 6,2 Nm - 6000 rpm -eje liso -sin freno -doble conector recto -encoder abs MT 16b SinCos -IP54

Servo motor BMH from the Lexium 32 servo drive range. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 6.0 Nm and achieves a peak torque of 18.0 Nm. Its rated speed depends on the supply voltage and can reach up to 5000 rpm. It results in a voltage-dependent nominal output of up to 2270 W. The built-in encoder is designed as a multiturn with 16 periods/revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight version. For mounting, the motor flange measures 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and conforms to protection rating IP54. The motor housing is rated at IP65. There is no holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco label, you can obtain detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.