Schneider Electric BMH1002P02F1A Servo motor BMH -IEC 100 mm -6,2 Nm -6000 rpm -eje liso -con freno -doble conector recto - encoder abs MT 128b SinCos -IP65/IP65

Servo motor BMH of the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous standstill torque of 6.0 Nm and achieves a peak torque of 18.0 Nm. Depending on the supply voltage, its rated speed is up to 5000 rpm. This results in a voltage-dependent rated power of up to 2270 W. The built-in encoder is designed as multiturn with 128 periods per revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The end of the shaft is smooth and conforms to IP54 protection. The motor housing is rated IP65. A holding brake is integrated. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.