Schneider Electric BMH1002P02A1A Servo motor BMH -IEC 100 mm -6,2 Nm -6000 rpm -eje liso -sin freno -doble conector recto - encoder abs MT 128b SinCos -IP65/IP65

The BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 6.0 Nm and reaches a peak torque of 18.0 Nm. Its rated speed depends on the supply voltage and can reach up to 5000 rpm. The resulting voltage-dependent rated power is up to 2270 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) in SinCos Hiperface format. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and conforms to the IP54 protection class. The motor housing corresponds to the IP65 protection class. There is no holding brake. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium environmental label, you can obtain detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.