Schneider Electric BMH1001T12F1A Servo motor BMH -IEC 100 mm -3,4 Nm -6000 rpm -eje c chaveta -con freno -doble conector recto - encoder abs MT 128b SinCos -IP65/IP65

The BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal holding torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed is up to 4000 rpm, depending on the supply voltage. It results in a voltage-dependent rated power of up to 1200 W. The built-in encoder is designed as multiturn with 128 cycles/revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a feather key and conforms to protection rating IP54. The motor housing complies with protection rating IP65. A holding brake is integrated. For the operation of the synchronous motor, we recommend the Lexium series LXM32 servo controllers. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental effects, and circular economy that support your sustainability goals.