Schneider Electric BMH1001T01A2A Servo motor BMH - IEC 100 mm - 3,4 Nm - 6000 rpm -eje liso -sin freno -doble conector acodado orientable -encoder abs ST 128b SinCos -IP54

The BMH series of the Lexium 32 servo drives consists of three-phase AC servo motors with a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo motor has a nominal continuous standstill torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its rated speed is up to 4000 rpm depending on the supply voltage. A voltage-dependent nominal power of up to 1200 W is achieved. The built-in encoder operates as a single turn with 128 periods/revolution (128x1024) in SinCos Hiperface design. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. For mounting, the motor flange measures 100 mm. The drive shaft diameter is 19 mm. The shaft end is smooth and complies with the IP54 protection standard. The motor housing is rated IP65. There is no holding brake. For the operation of this synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can receive detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.