Schneider Electric BMH1001P37F1A Servo motor BMH -IEC 100 mm -3,3 Nm -6000 rpm -eje c chaveta -con freno -doble conector recto - encoder abs MT 16b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features medium rotor inertia and is perfectly suited for high load applications. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous standstill torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its rated speed is up to 5000 RPM depending on the supply voltage. There is a voltage-dependent rated power up to 1520 W. The built-in encoder is designed as a multi-turn with 16 periods/revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforms to the IP65 protection rating. The motor housing is rated IP65. A holding brake is integrated. For the operation of the synchronous motor, the LXM32 series Lexium servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and the circular economy, which support your sustainability goals.