Schneider Electric BMH1001P36F1A Servo motor BMH -IEC 100 mm -3,3 Nm -6000 rpm -eje c chaveta -con freno -doble conector recto - encoder abs ST 16b SinCos -IP65/IP65

The servomotor BMH of the Lexium 32 servo driver range. The BMH series of three-phase AC servomotors features a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its nominal speed reaches up to 5000 rpm depending on the supply voltage. There is a voltage-dependent nominal power up to 1520 W. The built-in encoder is executed as a single turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and conforms to the IP65 protection class. The motor housing corresponds to the protection class IP65. A holding brake is integrated. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.