Schneider Electric BMH1001P11A1A Servo motor BMH -IEC 100 mm -3,3 Nm -6000 rpm -eje c chaveta -sin freno -doble conector recto - encoder abs ST 128b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed depends on the supply voltage and can go up to 5000 rpm. A voltage-dependent nominal power of up to 1520 W is achieved. The integrated encoder is designed as a single turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight version. For mounting, the motor flange is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is designed as a keyway and is compliant with protection class IP54. The motor casing corresponds to protection class IP65. There is no holding brake. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. With the Green Premium eco-label, you can obtain detailed information about material contents, environmental effects, and circular economy that support your sustainability goals.