Schneider Electric BMH1001P07A1A Servo motor BMH -IEC 100 mm -3,3 Nm -6000 rpm -eje liso -sin freno -doble conector recto - encoder abs MT 16b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 series of servo drives. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its rated speed is up to 5000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 1520 W. The built-in encoder is designed as a multiturn with 16 periods/revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange for mounting is 100 mm. The drive shaft has a diameter of 19 mm. The shaft end is smooth and complies with the IP54 protection class. The motor housing complies with the IP65 protection class. There is no holding brake. For operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, detailed information on material content, environmental impacts, and circular economy can be obtained to support your sustainability goals.