Schneider Electric BMH0703T31A1A Servo motor BMH -IEC 070 mm -3,4 Nm -8000 rpm -eje c chaveta -sin freno -doble conector recto - encoder abs ST 128b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal holding torque of 3.4 Nm and reaches a peak torque of 10.2 Nm. Its rated speed is up to 4000 rpm depending on the supply voltage. This results in a voltage-dependent rated power of up to 1130 W. The built-in encoder is designed as a single turn with 128 periods per revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23 in a straight design. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is designed as a keyway and conforms to the IP65 protection class. The motor housing is also IP65 rated. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium environmental label, you can get detailed information on material contents, environmental impacts, and the circular economy that support your sustainability goals.