Schneider Electric BMH0703T21A1A Servo motor BMH -IEC 070 mm -3,4 Nm -8000 rpm -eje liso -sin freno -doble conector recto - encoder abs ST 128b SinCos -IP65/IP65

Servo Motor BMH of the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features medium rotor inertia and is perfectly suited for high-load applications. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous standstill torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed, depending on the supply voltage, is up to 4000 rpm. The voltage-dependent rated output is up to 1130 W. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is smooth and conforms to protection type IP65. The motor housing corresponds to protection type IP65. There is no holding brake. The Lexium series LXM32 servo amplifiers are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information about material contents, environmental impacts, and circular economy, supporting your sustainability goals.