Schneider Electric BMH0703P31A2A Servo motor BMH -IEC 070 mm -3,4 Nm -8000 rpm -eje c chaveta -sin freno -doble conector acodado orientable - encoder abs ST 128b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features a medium rotor inertial moment and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed depends on the supply voltage up to 6500 RPM. It results in a voltage-dependent rated power up to 1540 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled at 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is designed as a keyway and conforms to protection class IP65. The motor housing is rated IP65. There is no holding brake. The LXM32 series of servo amplifiers is recommended for the operation of the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and the circular economy that support your sustainability goals.