Schneider Electric BMH0703P11F2A Servo motor BMH -IEC 070 mm -3,4 Nm -8000 rpm -eje c chaveta -con freno -doble conector acodado orientable - encoder abs ST 128b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 series servo drives. The BMH series of three-phase AC servo motors has a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its rated speed, depending on the supply voltage, is up to 6500 rpm. This results in a voltage-dependent rated power of up to 1540 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled at 90° and rotatable. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 14 mm. The shaft end is designed as a keyway and conforms to protection class IP54. The motor housing corresponds to protection class IP65. A holding brake is integrated. The LXM32 series servo amplifiers are recommended for the operation of the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impact, and circular economy to support your sustainability goals.