Schneider Electric BMH0702T36A2A Servo motor BMH - IEC 070 mm - 2,5 Nm - 8000 rpm -eje c chaveta -sin freno -doble conector acodado orientable -encoder abs ST 16b SinCos -IP65/IP67

Servo motor BMH from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors features a medium rotor inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous standstill torque of 2.48 Nm and reaches a peak torque of 7.44 Nm. Its rated speed depends on the supply voltage and can go up to 5000 rpm. The voltage-dependent rated power goes up to 1080 W. The built-in encoder is designed as a single-turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, rotated by 90 degrees and rotatable. The motor flange for mounting measures 70mm. The drive shaft has a diameter of 11mm. The shaft end is designed as a keyway and conforms to protection rating IP65. The motor housing is also IP65 protected. There is no holding brake included. For operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can receive detailed information about material contents, environmental impacts and circular economy that support your sustainability goals.