Schneider Electric BMH0702P17A1A Servo motor BMH -IEC 070 mm -2,5 Nm -8000 rpm -eje c chaveta -sin freno -doble conector recto - encoder abs MT 16b SinCos -IP65/IP65

Servo motor BMH from the Lexium 32 servo drive range. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 2.48 Nm and reaches a peak torque of 7.44 Nm. Its nominal speed depends on the supply voltage and can reach up to 7000 RPM. There is a voltage-dependent nominal power up to 1380 W. The built-in encoder is designed as multiturn with 16 periods/revolution (16x1024x4096) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is designed as a keyway and conforms to the protection class IP54. The motor housing conforms to the protection class IP65. There is no holding brake available. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, you can get detailed information on material contents, environmental impacts, and circular economy that support your sustainability goals.