Schneider Electric BMH0702P16A1A Servo motor BMH -IEC 070 mm -2,5 Nm -8000 rpm -eje c chaveta -sin freno -doble conector recto - encoder abs ST 16b SinCos -IP65/IP65

Lexium BMH servo motor from the Lexium 32 series of servo drives. The BMH series of three-phase AC servo motors exhibits a medium rotor inertia and is perfectly suited for high-load applications. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 2.48 Nm and reaches a peak torque of 7.44 Nm. Its rated speed reaches up to 7000 rpm depending on the supply voltage. A voltage-dependent nominal power of up to 1380 W is achieved. The built-in encoder is implemented as a single-turn with 16 periods per revolution (16x1024) as SinCos Hiperface. The electrical connection is made via connectors 2x M23 in a straight design. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is executed as a keyway and conforming to the protection type IP54. The motor housing meets protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the Lexium series LXM32 servo amplifiers are recommended. Thanks to the Green Premium eco-label, detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals can be obtained.