Schneider Electric BMH0702P06A1A Servo motor BMH - IEC 070 mm - 2,5 Nm - 8000 rpm -eje liso -sin freno -doble conector recto -encoder abs ST 16b SinCos -IP54

Lexium 32 servo motor drive series BMH servo motor. The BMH series of three-phase AC servo motors features a medium rotor inertia moment and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 2.48 Nm and achieves a peak torque of 7.44 Nm. Its rated speed is up to 7000 rpm depending on the supply voltage. There is a voltage-dependent continuous power of up to 1380 W. The built-in encoder is designed as a single turn with 16 periods/revolution (16x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 70 mm. The drive shaft has a diameter of 11 mm. The shaft end is smooth and conforms to protection class IP54. The motor housing complies with protection class IP65. There is no holding brake present. For the operation of the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and circular economy to support your sustainability goals.