Schneider Electric BMH1403P01A1A BMH 140MM 24NM IP54

Servo motor BMH series of the Lexium 32 servo drives. The BMH series of three-phase AC servo motors features a medium rotor moment of inertia and is perfectly adapted for applications with high loads. Thanks to the winding technology, there is a very high power density in a compact design. This servo has a nominal continuous stall torque of 22.5 Nm and achieves a peak torque of 72 Nm. Its nominal speed is up to 3000 rpm depending on the supply voltage. A voltage-dependent nominal power of up to 4370 W results. The built-in encoder is designed as a single turn with 128 periods/revolution (128x1024) as SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. For mounting, the motor flange is 140 mm. The drive shaft has a diameter of 24 mm. The shaft end is smooth and conforms to the IP54 protection type. The motor housing corresponds to the protection type IP65. There is no holding brake. For operating the synchronous motor, the servo amplifiers of the Lexium series LXM32 are recommended. Thanks to the Green Premium eco-label, you can obtain detailed information about material contents, environmental impacts, and circular economy that support your sustainability goals.